Quality Assurance High-Tech Enterprises Tracking Index Material Leak Test Equipment

• After-sales Service: Available
• Warranty: 1 Year
• Test Pressure: 0.1-3bar
• Test Medium: Air
• Pressure Display Accuracy: 0.01kpa
• Driving Air Pressure: 0.2-0.7MPa
• Model NO.: HJ007
• Transport Package: Plywood
• Specification: 1600*1100*2040
• Trademark: H&H
• Origin: China
• Production Capacity: 10 Sets Per Month

Product Description

High Precision Automotive Wire Harness Leak Test Equipment

 

Introduction to products

The air tightness of the car wiring harness is not good, which may cause the failure of signal transmission and the loss of function equipment; Or contact water short circuit and fire, or insulation failure leakage and other accidents. Therefore, in order to ensure the quality of the car and ensure the safety of production and driving, the wiring harness should be tested for air tightness before leaving the factory. The developed automobile wire harness air tightness detector is used for the air tightness detection of automobile wire harness. The leak detector uses a unique pneumatic valve seal to make the product run more accurate and stable. Other sensor components are also imported well-known brands. Ensure the normal and stable operation of the product.


Product feature
Equipped with high precision low pressure regulator, more accurate test results.
Full function input/output interface, can be connected to external control equipment.
The leak detector uses a large color LCD screen display, and is equipped with a qualified or unqualified alarm function, so that the problem product will not cause false detection because of manual judgment.
Can carry out multi-station detection, independent control.
The leak detector has a real-time recording function and can be read on the computer. Achieve real-time product data.

Product Parameter

Test pressure	0.1-3bar
Test medium	Air
Pressure display accuracy	0.01Kpa
Test temperature	normal temperature drying
Test sation	1
Driving air pressure	0.2-0.7Mpa