Oscillating Tube Rain Test Device IP Test Equipment for Ipx3 to Ipx4

• After-sales Service: Yes
• Warranty: One Year
• Water Flow: 1-10L/Min Adjustable
• Pressure Gauge: 0~0.25MPa
• Servo Motor: 750W,Matsushita Electric Works
• Test Items: Suitable for Ipx3 and Ipx4 Testing of Products
• Model NO.: HH0802
• Transport Package: Plywood
• Specification: Designed based on the selection of swing tubes
• Trademark: HJ
• Origin: China
• Production Capacity: 5 Set for Month

Product Description

Oscillating tube rain test device IP Test Equipment For IPX3 to IPX4

Product introduction:
This device is divided into open type and box type. Using PLC control, the motor drives the swing tube to reciprocate at a certain angle, and at the same time controls the water flow, and the turntable rotates at a certain speed, so that all sides of the sample can be tested evenly.



Testing standards:
IPX3 and IPX4 of GB 4208-2008 (IEC 60529) "Enclosure Protection Level (IP Code)", GB2099.1 (IEC 60884-1), GB4706.1 (IEC 60335-1), GB7000.1 (IEC 60598-1), GB/T 4942.1-2006 "Protection level (IP code) classification of the overall structure of rotating electrical machines", GB/T 4942.2-1993 "Protection level of low-voltage electrical enclosures", QC/T 413-2002 "Automotive electrical equipment" Basic technical conditions.



Test items:
Suitable for IPX3 and IPX4 testing of products


Test objects:
Such as electronic appliances, lamps, electrical cabinets, electrical components, automobiles, and motorcycle electrical products (such as automobile instruments, various types of switches, micromotors, etc.)



Technical Parameters:

Item	parameters
Included angle of two holes	IPX3:120°; IPX4:180°
Swing angle	IPX3:120°(±60°); IPX4:350°(±175°)
Rain speed	IPX3: 4 seconds/time (2×120°); IPX4: 12 seconds/time (2×350°);
Test time	0.01S~99 hours and 59 minutes, can be preset
Angle indicator	0-360°
	1/2″,Exclude stagnant water

Q&A:
Q1: What do the waterproof levels of IPX3 and IPX4 mean respectively?
A1: IPX3 refers to preventing the intrusion of sprayed water, that is, preventing rain or preventing water sprayed at an angle less than 60° from the vertical from entering the appliance and causing damage; while IPX4 refers to preventing the intrusion of splashing water, that is, preventing splashing from all directions. The incoming water may enter the appliance and cause damage.

Q2: How to test the IPX3~IPX4 swing pipe rain test device?
A2: When testing, first fix the sample on the sample turntable, and adjust the height of the turntable and the distance between the swing tube and the sample, which is usually 200mm. Then, select the corresponding waterproof level (IPX3 or IPX4) on the operation panel, and set the test time and turntable speed. After starting the test, the swing tube will swing at a predetermined angle and frequency to simulate the impact of rain or splashing water on the sample. After the test is completed, the equipment will automatically stop and alarm. At this time, the sample should be checked for water or other damage.

Q3: How to ensure the accuracy of the pendulum pipe rain test?
A3: To ensure the accuracy of the test, you need to pay attention to the following points: First, regularly check whether the needle on the swing tube is intact to ensure that it is not blocked or damaged; second, use a clean water source for testing to avoid impurities or contaminants from affecting the test results. influence; finally, the test should be carried out in strict accordance with the test standards and operating specifications to avoid human errors.

Q4: What should I do if the swing tube rain test device fails during the test?
A4: If a fault occurs during the test, such as the emergency stop not being reset, not clearing, or the swing tube not returning to zero, etc., troubleshooting should be carried out according to the equipment's operating manual or prompt information. For example, when the emergency stop is not reset, the emergency stop button should be rotated clockwise to reset; when it is not cleared, the "clear" button should be clicked on the test interface; when the swing tube is not reset, the "swing tube reset" button should be clicked And wait for the swing tube to return to the neutral position. If the fault cannot be eliminated, it is recommended to contact the equipment manufacturer or professional maintenance personnel for help.

Q5: What are the safety precautions for the swing tube rain test device?
A5: When using the pendulum tube rain test device, you need to pay attention to the following safety matters: First, ensure that the equipment is well grounded to avoid the risk of leakage or electric shock; secondly, during the test, do not touch the pendulum tube or sample at will to avoid injury; Finally, regularly check whether the power cord, plug and other parts of the equipment are intact to avoid safety hazards such as fire.

If you need to know more IP Test Equipment, you can consult customer service staff and we will patiently ask you for answers!