UL817 Cable Testing Equipment Abrupt Pull Test Apparatus with 6 Working Stations

• After-sales Service: Available
• Warranty: 1 Yaer
• Max Diameter of Workpiece: 3200mm
• Mass Scope of Workpiece: 10000kg
• Type: Vibration Testing Machine
• Maxcapacity: <1000KN
• Model NO.: HDX1314
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 500-1000Kg
• Power Source: AC380V
• Oil Cylinder Position: Under
• Certification: Third Part Calibration Certificate(Cost Additional
• Ambient Humidity: Less Than 85%Rh
• Transport Package: Plywood
• Specification: 1500*1500mm
• Trademark: H&H
• Origin: China
• Production Capacity: 20 Sets Per Month

Product Description

UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations

UL817:

96.4 Each molded-on representative device is to be secured in the jaws of the flexing machine so that the point of cord exit is at the center of rotation. The rotating jaws are to be adjusted to rotate to an angle of 90° to each side of the centered position. At the centered position, the cord is to hang vertically and the weight, selected in accordance with 96.3, attached to each cord approximately 1 2 inches (305 mm) from the point of rotation. See Figure 96.1 .
96.5 Each representative device is to be subjected to complete flexing cycles until a conductor in each device has opened (as determined by a continuously-monitoring detection circuit), or until 2,500 cycles is reached, whichever comes first. A flexing cycle consists of: rotation of the jaws from the vertical (centered) position until 90° to one side, back past the vertical position until 90° to the other side, and back to the vertical (centered) position. The rate of testing shall be 1 0 cycles per minute.

 

Description:

This device is used for the resistance abrupt pull test of Plug of plug power line, torsion test, load test and grounding current test.

According to the standard UL817 clause 96.4-96.5 Flexing test, clause 99.1-99.2 Abrupt Pull Test, clause 100.1-100.3 Jacket retention test.

 

Test sample: Plug power line.

 

Feature: Using automatic mode test, it will automatic shutdown when reach to the setting number if test times or setting time.

 

Technical parameters:

Power supply	AC 220V 50Hz
Load current	0~40A , Arbitrary adjustable
Load voltage	4~12V
Working station	6 stations
Test times	1~9999 times, can be preset
Test time	0.1~999.9S
Load weight	2.5 pound(lb) , 3 pound(lb) , 15 pound(lb) 6 pcs per each
Ambient temperature	0~40ºC
Ambient humidity	less than 85%Rh
Reference standard	UL817 clause 96.4-96.5 Flexing test, clause 99.1-99.2 Abrupt Pull Test, clause 100.1-100.3 Jacket retention test