IEC60529 IPX3/IPX4 Handheld test device against dripping and splashing water with IP Test Equipment
Product introduction:
The main difference between the handheld waterproof test of IPX3 and IPX4 is that IPX4 requires the balance baffle of the sprinkler head to be removed, so that the shell is subject to splashing water in all possible directions. This device can be used with the sample rotating table.
Testing standards:
IPX3 and IPX4 of GB 4208-2008 (IEC 60529) "Enclosure Protection Level (IP Code)", GB2099.1 (IEC 60884-1), GB4706.1 (IEC 60335-1), GB7000.1 (IEC 60598-1), GB/T 4942.1-2006 "Protection level (IP code) classification of the overall structure of rotating electrical machines", GB/T 4942.2-1993 "Protection level of low-voltage electrical enclosures", QC/T 413-2002 "Automotive electrical equipment" Basic technical conditions".
IP Test Equipment project:
Can be used for IPX5 and IPX6 testing of products.
Test objects:
Such as electronic appliances, lamps, electrical cabinets, electrical components, automobiles, and motorcycle electrical products (such as automobile instruments, various switches, micromotors, etc.) IP Test Equipment products.
Technical Parameters:
| Item |
Parameter |
| Water flow rate |
>10L/min±5% |
| Pressure |
50~150kpa |
| Water quality |
Clean, impurity-free water, equipped with water cleaning filter device |
| Sprinkler parameters |
Outer diameter Ф102mm, spherical diameter SФ75.5mm, 1 middle hole, 24 holes in the inner two circles with an angle of 30°, and 96 holes in the outer four circles with an angle of 15° |
A total of 121 holes, hole diameter Ф0.5mm, made of brass
|
Product Structure:
Q&A:
Q1: What is the main purpose of this handheld test device?
A1: This handheld test device is mainly used to test the IPX3 and IPX4 waterproof levels of product shells. IPX3 stands for protection against spray water intrusion, while IPX4 stands for protection against splash water intrusion.
Q2: How to use this handheld test device for waterproof testing?
A2: First, place the test sample on a relatively flat table to ensure the safety and stability of the testing environment. Then, install the shower nozzle, adjust its position from the sample within the range of 300~500mm, and adjust the angle of the nozzle from top to bottom. Next, select the IPX3 or IPX4 test mode according to the test requirements. For IPX3 mode, lower the water shield to simulate rain; for IPX4 mode, open the water shield to simulate splashing water. After setting the test time, start the test. After the test is completed, remove the sample and observe its waterproof performance.
Q3: What are the key parameters of this handheld test device that need to be paid attention to?
A3: Key parameters include water pressure, hole diameter, number of holes, nozzle spherical diameter, etc. When using, it is necessary to ensure that these parameters comply with the test standards and adjust according to the waterproof requirements of the specific product.
Q4: How to ensure the accuracy of the test if there is no flow meter?
A4: Although this handheld test device does not come with a flow meter, the accuracy of the test can be ensured through other means. For example, the water spray volume and angle of the nozzle can be regularly calibrated to ensure that it is consistent with the test standard. At the same time, strictly follow the test steps and operating specifications to avoid human errors.
Q5: What safety matters need to be paid attention to when using this handheld test device?
A5: When using, please ensure that the test device and power cord are intact to avoid the risk of leakage or electric shock. At the same time, avoid operating in wet or slippery environments to avoid accidents. In addition, do not point the test device at people or animals to avoid injury.
If you need to know more about IP testing equipment, you can consult customer service staff and we will patiently answer your needs!
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}