IP Test Equipment Handheld test device against splashing water and splash water IPX5/IPX6
Product introduction:
IP Test Equipment anti-drip and splash handheld test device is a professional equipment used to test the waterproof performance of product casings. It complies with relevant international standards and specifications and can conduct IPX5 and IPX6 level waterproof tests on products to ensure that the products have good waterproof performance in the actual use environment.
Testing standards:
IPX5 and IPX6 of GB 4208-2008 (IEC 60529) "Enclosure Protection Level (IP Code)", GB2099.1 (IEC 60884-1), GB4706.1 (IEC 60335-1), GB7000.1 (IEC 60598-1), GB/T 4942.1-2006 "Protection level (IP code) classification of the overall structure of rotating electrical machines", GB/T 4942.2-1993 "Protection level of low-voltage electrical enclosures", QC/T 413-2002 "Automotive electrical equipment" Basic technical conditions".
Main feature:
1. Handheld design: easy to carry and operate, suitable for testing needs in different places and environments.
2. High-precision water spray system: IPX5 and IPX6 nozzles have different inner diameters and water spray angles, which can be selected and adjusted according to test needs to ensure the accuracy and reliability of the test.
3. Adjustable pressure: The device is equipped with a pressure gauge, which can adjust the pressure of water spray according to test requirements and simulate different water pressure environments.
4. High safety performance: The device fully considers safety factors during the design and manufacturing process, and uses high-quality materials and processes to ensure safety during use.
Test object
Such as electronic appliances, lamps, electrical cabinets, electrical components, automobiles, and motorcycle electrical products (such as automobile instruments, various switches, micromotors, etc.)
Product Parameters
Model |
HH0804-1 |
HH0804-2 |
Parameter items |
IPX5 |
IPX6 |
Nozzle aperture |
φ6.3mm |
φ12.5mm |
Water flow |
12.5±0.625L/min, flow meter adjustable |
100±5 L/min, flow meter adjustable |
Distance between nozzle and shell |
2.5~3m |
Test time |
Not less than 1min/m² (but not less than 3 minutes) |
Venue requirements |
Dedicated IP waterproof test room with a width of more than 3m, with good water inlet and drainage functions, wall installation |
FAQ
Q1: What is the function of the flow meter of this test device?
A1: The flow meter is used to measure and control the water flow during the test process to ensure that the test conditions comply with IPX5/IPX6 standards. Users can adjust the flow meter settings according to test requirements to obtain accurate water spray flow.
Q2: What is the difference between using a test device with a flow meter for IPX5 and IPX6 testing?
A2: IPX5 and IPX6 tests are different in water spray flow rate and method. IPX5 requires water to be sprayed onto the sample from different angles, while IPX6 requires water to be sprayed from a stronger, more direct angle. The test device with a flow meter can accurately control the water flow under these two test conditions, ensuring the accuracy and repeatability of the test.
Q3: How to calibrate the flow meter to ensure the accuracy of the test?
A3: In order to ensure the accuracy of the test, users should calibrate the flow meter regularly. Calibration methods usually include comparison testing with standard flow equipment and adjusting the flow meter settings based on the comparison results. Specific calibration steps may vary by device model, and it is recommended to refer to the device's operating manual or contact the device manufacturer for detailed calibration guidance.
Q4: Why is a higher water spray flow rate required when conducting IPX6 testing?
A4: The IPX6 test requires simulating a more intense water spray environment to test the waterproof performance of the sample under extreme conditions. Therefore, higher water spray flow rates are required to simulate this environment. The test device with a flow meter can easily adjust the water spray flow rate to meet the requirements of IPX6 testing.
Q5: What are the safety precautions when using a handheld test device for waterproof testing?
A5: When using a handheld test device for waterproof testing, the user should ensure that the device is firmly connected, the power source is safely grounded, and the safety regulations in the operation manual are followed. At the same time, avoid operating the equipment in wet or slippery environments to prevent accidents. In addition, the water source and power supply should be turned off promptly after the test to ensure that the equipment is in a safe state.
Thank you for your visit. Regarding IP Test Equipment, you can further consult customer service and we will solve your problems!
Company Profile