Ipx1~8 Waterproof Test System with IP Test Equipment

• After-sales Service: Available
• Warranty: 1 Yaer
• Max Diameter of Workpiece: 500mm
• Mass Scope of Workpiece: 5000kg
• Type: Waterproof Test
• Maxcapacity: <1000KN
• Model NO.: HCTE0078
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Certification: Calibration Certificate(Cost Additional)
• Application: Applies to Conduct Ipx1, Ipx2 Testing
• Tank Material: Stainless Steel
• Hole Distance: 20mm
• Rainfall Flow: 1mm/Min, 3mm/Min, User-Set Parameters
• Water Dripping Height: 200mm (Automatically Control by The Test Equipment
• Test Time: 10min, Can Be Set According to The Need
• Transport Package: Plywood
• Specification: 1000mmX600mm
• Trademark: H&H
• Origin: China
• Production Capacity: 1 Set Per Month

Product Description

IPX1~8 Waterproof Test System with  IP Test Equipment

 

 

 

 

 

IPX1-8 waterproof test system includes vertical drip rain testing machine, oscillating tube tester for IPX3 and IPX4, spray nozzle,  handheld jet nozzle, smart water supply and control system, IPX8 water tightness pressure tester and tiltable rotating stage.

 

 

Vertical Drip Rain Testing Machine

Description

This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2,IEC60884-1 clause 16.2.2

The rise and fall of the drip box is controlled by the motor. It is equipped with the rotatable objective table whose rotating speed is 1r/min for IPX1 test; It is also equipped with 15°bevel for supporting sample for the IPX2 test.

Specifications

Model	HCTE0078
Application	Applies to conduct IPX1, IPX2 testing.
Rain area	1000mmX600mm
Tank material	Stainless steel
Dripping aperture	φ0.4mm
Hole distance	20mm
Rainfall Flow	1mm/Min, 3mm/Min, user-set parameters (error:  + 0.5mm / min).
Water dripping height	200mm (automatically control by the test equipment)
Test time	10Min, can be set according to the need
Draining	Automatically emptying the tank water after the test is completed
Body material	Industrial aluminum alloy
Dimensions (LxDxH)	1100X1200X2600mm
Machine structure	Wall Mount
Air compressor (Optional, not included)	Silent air compressor

   
 
Oscillating Tube Tester for IPX3 and IPX4
Product information:  
Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4,IEC60335-1 clause 15.1. It is used for the waterproof test of the electrical equipment.
The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±175°with the speed required by the standard through machine adjusting angle.
The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved.
 
Technical parameters: 

Water supply	Water flow rate>10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
The size of the oscillating tube	Standard coming with R400, R600, R800 oscillating tubes (other size R200,R1000,R1200,R1400,R1600mm can be optional), stainless steel
Water hole	Φ0.4mm
Included angle of two holes	IPX3: 120°; IPX4: 180°
pendulum angle	IPX3: 120°; IPX4: 360°
Raining speed	IPX3: 4s/time(2×120°); IPX4: 12s/time(2×360°);
Water flow	Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/minX per hole)
Testing time	0.01S~99 hours 59mins,can be preset
Pressure gauge	0~0.25MPa
Site requirements	Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation
The area	According to the oscillating tube chose

 

Spray Nozzle
Product information:
The spray nozzle is designed and manufactured in accordance with IEC60529 clause IPX3 and IPX4, So this is also a product of IP Test Equipment,IEC60335-1 clause 15.1. It is used for the waterproof test of the electric appliance. Some parts of the enclosure cannot be wet by the oscillating tube. Under this circumstance, the handheld spray nozzle is used by manual.
The difference between IPX3 and IPX4 is that the baffle should be removed in the IPX4 test.
 
Technical parameters:

Water supply	Water flow rate is 50~150kpa clean water without inclusion.
Spray nozzle parameters	external diameter:  Ф102mM spherical diameter:  SФ75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is   30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter:  Ф0.5mm It is made of brass.
Water flow	10L/min±5%, Flow meter is adjustable
Range of pressure gauge	0~0.4Mpa
Baffle	removable
Pressure gauge	0~0.25MPa
Site requirements	Dedicated IP waterproof test room,The ground should be flat with illumination With good function of inflow and drainage. Wall installation

 
 

Handheld Jet Nozzle
Description
The jet nozzle is designed and manufactured in accordance with IEC60335-1 clause 15.1, IEC60529 clause IPX5 and IPX6. It is used for the waterproof test of the electric appliance.
 
Technical parameters:

	IPX5	IPX6
Water supply	Water flow rate > 12.5L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment	Water flow rate >100L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment
The nozzle diameter	Ф6.3mm	Ф12.5mm
Water flow	12.5±0.625L/min, Flow meter is adjustable	100±5 L/min, Flow meter is adjustable
The distance from jet nozzle to enclosure	2.5~3m	2.5~3m
Testing time	Not less than 1min/m²(not less than 3 mins)	Not less than 1min/m²(not less than 3mins)
Pressure gauge	0~0.25MPa	0~0.25MPa
Site requirements	Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation	Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation

 
 

Smart Water Supply And Control System
Product information:
The smart water supply and control system is designed and manufactured in accordance with the standard requirement of IEC60335-1 clause 15.1, IEC60529 IPX1~IPX8 and related requirement of IEC 60598. It is used for waterproof test of the electric appliance, such as the luminaires.
 
Technical parameters: 
1. The smart water supply and control system is applicable to:
    (a) Water supply for IPX1~IPX6 waterproof test
    (b) IPX7 water immersion test
    (c) Water storage for IPX8 water tightness test
    (d) Automatic control for the whole waterproof equipment
2. Water supply method: constant flow water supply, constant pressure water supply
3. Water supply control process:  After user preset the water flow value and water pressure value on the touch screen, the electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter.
4. There are large flow and small flow two ways water supply.
5. Large flow water supply:
    (a) It is applicable to IPX5~IPX6 strong water spray test and water injection of IPX8
    (b) Flow range: 10~100L/min
    (c) Flow accuracy: ±0.5L/min
    (d) Flowmeter: turbine flowmeter
    (e) Water pump: stainless steel centrifugal pump
6. Small flow water supply:
    (a) It is applicable to IPX1~IPX4 waterproof test
    (b) Flow range:  1~10L/min
    (c) Flow accuracy:  ±0.5L/min
         Flowmeter: turbine flowmeter
    (d) Water pump: stainless steel centrifugal pump
7. Water storage tank:
    (a) It is applicable to water storage of IPX5~IPX6 strong water spray test, water injection of IPX8, IPX7 immersion
    (b) Volume:  500L
    (c) Dimension:  W600mmXD660mmXH1300mm
    (d) Observation window:  toughened glass window
    (e) Observation window dimension:  W200mmXH1250mm
    (f) Depth gauge:  stainless steel
    (g) Depth gauge height:  1200mm, accuracy1mm
    (h) Liquid level control:  float switch + overflow pipe
8. IPX7 immersion automatic lift bracket
    (a) Lifting distance:  0~1200mm
    (b) Bracket dimension:  L400mmXW400mm
    (c) Bracket load weight:  50Kg
9. Control of IPX8
    (a) Pressure range:  0~0.6Mpa
    (b) Time range:  0~999999s
10. Control Cabinet:
    (a) Flow detection:  flow signal feedback through electronic flowmeter
    (b) Flow setting:  set on touch screen
    (c) Controller:  Mitsubishi PLC
    (d) Friendly interface:  7 inch, color touch screen
    (e) Control Function: constant flow water supply, constant pressure water supply, and test time control.
    (f) Protection function:  leakage protection, overload protection, short circuit protection
12. Filter:  stainless steel shell, fine filter core
13. Body material:  industrial aluminum alloy 
14. Outer dimension:  1400mmX750mmX1600mm
15. Power supply:  AC 380V, 50HZ
 
 
IPX8 Water Tightness Pressure Tester
Product information:
The IPX8 Water Tightness Pressure Tester is manufactured in accordance with the standard of Clause IEC60529 degree of protection provided by enclosures (IP Code) of the IPX8, IEC60884-1, IEC60335-1, IEC60598-1. It is used to assessment of enclosures and sealing element whether can ensure good performance of equipment and components after the water test or during the test.
 
Parameter:

Pressure vessel	Stainless steel tank, diameter 0.8 meter, height 1 meter
Pressure adjustment range	0 ~ 6bar (can be customized)
Pressure system	Stainless steel pump + frequency converter
Pressure gauge accuracy	0.25 degree, range: 10bar
Testing time	0-99min
Maximum limit pressure	6 bar
Pressure protection	Pressure switch protection
Connect to the water supply equipment by 3/4 high pressure steel wire hose connection

 
 
 
Tiltable Rotating Stage
Product Information:
The tiltable rotating stage is designed and manufactured in accordance with the standard requirement of IEC60335-1 Clause 15.1.
 

Turntable diameter	Ø600mm
Sample holder	Ø600mm
Turntable speed	1rpm
Tiltable angle	15°
Test angle of rotation	90° , continuous rotation
Adjustable height of the adjustable telescopic tube	300mm, 1200mm-1500mm
Body material	Industrial aluminum alloy
Dimensions (LxDxH)	800X800X1500mm
Stage network type
Aluminum base with casters
Reversible control, rotational movement control by the control cabinet