Test bench for speed reducer of oil pumping unit
Product Introduction:
The test bench for the reducer of the pumping unit is mainly used to test the performance of the reducer. It can help researchers understand the transmission performance of the reducers with various gear drives, belt drives, and continuously variable transmission, and measure the torque, speed, and power of the reducer input, as well as the torque, speed, and power of the output. In addition, it can also convert parameters such as efficiency, vibration, noise, and temperature rise, so as to analyze the test results, and evaluate the comprehensive mechanical properties of the transmission components and devices. This test bench can provide practical reference materials and design basis, and help improve the performance and quality of the reducer.
Product features:
1.Good loading characteristics: constant torque test below the rated speed.
2.Particularly good loading stability: more than 0.2% of the torque and speed stability.
3.Particularly good energy-saving effect: Because the bus feedback scheme is adopted, the electricity absorbed by the loading motor is directly fed back to the input end of the drive variable frequency motor through the bus, ensuring that the conversion efficiency of the electric energy is not less than 75%, so the energy-saving effect is particularly good, and it has no impact on the power grid, and the distribution capacity is greatly reduced.
Functions of the product:
1.It can study the transmission performance of speed reducers with various gear drives, belt drives, and continuously variable transmission.
2.The test bench can measure the input torque, speed, and power of the speed reducer, as well as the output torque, speed, and power.
3.Based on the measured data, the test bench can also convert parameters such as efficiency, vibration, noise, and temperature rise.
4.The test bench can analyze the test results, thereby evaluating the comprehensive mechanical performance of the transmission components and devices.
5.Ultimately, this test bench provides practical reference materials and design basis, and provides data support for the optimization and improvement of the speed reducer.
Product Parameters
| Tooth transmission method |
Double arc herringbone gear two-stage transmission |
| Rated torque |
48kN.m |
| Overall transmission ratio |
42.8
High speed level:6.5
Low speed level:5.8 |
| Total center distance |
950
High speed level:370
Low speed level:580 |
| Oil storage capacity |
250 L |
| Sealing method |
complex |
| Lubricating oil tank size |
16*10mm |
| Chamber wall thickness dimensions |
14.5mm |
| Warranty |
1 year |
Company Profile
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}